top of page

THIN10

Direct Flow R.O Water Filtration System

THIN10 is a direct flow reverse osmosis water system without a tank. It can provide the user a high-capacity flow of 1,6 litre/min (THIN10-III model) of purified water. The superior quality of the materials/parts used and the sleek inside & outside design makes it a perfect solution for residential use. Because of its small thickness (only 99mm thick) and modern design, it can fit in tight places (e.g. under the sink) or be installed in a wall in plain sight. 

thin10_1_cc_170922.jpg
qualitywater_thin10_latvany_2_cc.jpg

OUR TOP PERFORMANCE R.O WATER SYSTEM

UNIQUE FINE DESIGN INSIDE AND OUTSIDE

THIN10 is an up-to-date modern water system that lets you enjoy effortlessly on demand clear water. THIN10 is sleek and stylish so you can install it anywhere in your place in plain sight. The simple casing commonly used for water purifiers was changed to an up-to-date, modern and stylish surface. A multiple prize-winner designer team was working on it to create this modern, stylish outside and the structured inside. Anywhere you place your water purifier, you can be sure that it will be an ornament of your kitchen.

THE THINNEST R.O WATER SYSTEM

We have designed the device to fit to the smallest place as possible to not taking up unnecessary area in your kitchen counter. Since it’s thickness falls short of 10 cm it can be installed even under the sink and because no tank is needed you can save even more space.

thin10product2-51a754c7.png
processor.PNG

INNOVATED SMART
PROCESSOR

  • EASY TO IMPROVE

  • SOFT START OF PUMP

  • COMPUTER SURVELLIANCE

  • WARNING LIGHT AND ACOUSTICAL SIGNAL

  • AUTOMATIC MEMBRANE FLUSH

  • ECONOMIC OPERATION

MOBILE APPLICATION

  • GUARANTEE SERVICE

  • CUSTOMER REGISTRATION

  • WARNING FOR MAINTENANCE

  • PROMPT SERVICE

App3.png

THIN10 BENEFITS

  • The thinnest reverse osmosis system

  • Unique fine design inside and outside

  • High recovery rate

  • Easy cartridges replacement &  maintenance

  • No tank required

  • Tool not required to open front panel

  • Innovated smart processor

  • Filter change warning system

  • Leaking detector system

  • Mobile application

  • Freshness of water filtered in real time. No more stale water from a tank.

  • Virtually unlimited filtered water production. While conventional systems with tanks are limited by the tank capacity, and require prolonged timeouts to refill the tank, a direct flow system is limited by the membrane filtration rate only.

  • Instant and sustained filtered water flow. It doesn’t depend on how full the tank is.

  • Space-saving, compact installation since tank is not needed.

  • Better water purification quality due to improved contaminant rejection rate.

  • Typically, up to three times less water is wasted per gallon of filtered water, compared to the conventional tank and water storage systems, this is due to the much higher efficiency (recovery) rate. Saves you money and Planet Earth’s water resources!

THIN10 KEY FEATURES

  • Clean and safe drinking water right in your home. No need to transport and dispose of bottled water any more.

  • Factory-preinstalled filters and membrane for faster and easier setup.

  • Filters and membrane quick-change housings for easy regular maintenance.

  • Compact and beautiful design.

  • Automatic flush valve: for peak performance and healthier membrane. Powerful flush at the end of each water filtration cycle prevent the scale and debris buildup on the membrane outer surface.

  • Powerful booster pump increases pressure to radically improve the performance and effectiveness of the R.O. unit in all three key areas: increases filtered water flow (production rate), increases rejection rate (improves water purification quality), increases recovery rate (decreases amount of waste water).

  • Prolongs the membrane and pre-filter(s) service life due to increased recovery rate.

  • Fully automatic operation: just open the faucet and get clean water instantly; automatic shut off and flush.

  • LED indicators: easily understand what the state of your R.O. unit is.

  • Quick fittings for easy tube connections and change of filters.

  • CAPACITY 1,6l/min (THIN10-III MODEL)

  • MAX RECOVERY: 60%

  • LEAK DETECTOR AND ALARM SYSTEM

  • MAINTENANCE MONITORING SYSTEM

  • AUTOMATIC MEMBRANE FLUSH

  • SIZE: 380 X 535 X 99 mm

  • SOFT START OF PUMP

  • ASSEMBLED ONLY WITH QUICK FITTINGS

  • BOOSTER PUMP FLOW RATE: 3,4 L/MIN

  • WATER TEMPERATURE: 10-45 °C

  • INLET PRESSURE: 2-4,5 BAR

  • WEIGHT: 9.2-12 KG (DEPENDING ON MODEL)

  • VOLTAGE SUPPLY: 240 V / 55 HZ

_S6A4054.jpg

IMPORTANT
TECHNICAL DETAILS

  • CAPACITY 1,6l/min (THIN10-III MODEL)

  • MAX RECOVERY: 60%

  • LEAK DETECTOR AND ALARM SYSTEM

  • MAINTENANCE MONITORING SYSTEM

  • AUTOMATIC MEMBRANE FLUSH

  • SIZE: 380 X 535 X 99 mm

  • SOFT START OF PUMP

  • ASSEMBLED ONLY WITH QUICK FITTINGS

  • BOOSTER PUMP FLOW RATE: 3,4 L/MIN

  • WATER TEMPERATURE: 10-45 °C

  • INLET PRESSURE: 2-4,5 BAR

  • WEIGHT: 10-12 KG (DEPENDING ON MODEL)

  • VOLTAGE SUPPLY: 240 V / 55 HZ

THIN10 MODELS  

  • THIN10-II (2x180 GPD, 1.4 L/min)

​

  • THIN10-III (3x180 GPD, 1.6 L/min)

​

  • THIN10-UV (2x400 GPD + UV, 2.0 L/min)

FILTERS REPLACEMENT

Filter suggested frequency for replacement

​

  • 5um sediment filter: 12 months

  • Granular activated carbon filter with KDF55 & silver: 12 months

  • Osmosis membranes: 24 months

zxz.png
bottom of page